JOHNSON CONTROLS DIGITAL THERMOSTAT - A419
The Johnson Controls Digital Temp Controller operates by overriding the internal thermostat in a refrigerator or freezer which gives the brewer greater control over the temperature.
It can be used to heat or cool a fermentation environment when hooked up to a refrigerator. It turns the compressor on when the ambient temperature rises above your programmed temperature.
When it is hooked up to a heater, it activates when the temperature drops too low. A sensor probe monitors the temperature inside while the readout displays it in either Fahrenheit or Celsius.
- (2) 5 foot extension cords with plug,
- 6 foot sensor lead
- Easy to read LCD display
- Temp set points from -30^f to 212^f
- Set differential of up to 30^f
(you choose how much the temperature will vary)
The A419 electronic temperature control is a single stage, electronic temperature control with a single-pole, double-throw (SPDT) output relay.
The control features a lockable, three-button touchpad for setup and adjustment and a liquid crystal display (LCD) which displays the sensed temperature and other control functions.
A front panel LED indicates theoutput relay status.
Voltage: 120V 208V 240V
Horsepower: one one one
Full Load Amps: 16 9.2 8
Locked Amps: 96 55 48
Non-ind Amps: 15 10 10
Pilot duty: 125 VA at 120 to 240 VAC (N.C. contacts)