IBIS WATER or SODA WATER DISPENSING TOWER - 2 FAUCET
The IBIS Towers are a modern looking addition to the classic looking Soda Draft Arms. This Tower will pour soda syrups, water and/or carbonated water from each faucet; it WILL NOT mix syrup and water together inside the faucets. This is a PREMIX type Tower. If you want to serve pre-mixed soda you will need to make it in a Ball Lock Keg and serve through the keg to the Tower.
The European style faucet has an extended spout for product control. It also has an ADJUSTABLE FLOW CONTROL VALVE so that you may pour with precision even at the high PSIs (70-100psi) that soda water requires.
- High luster Chrome finish
- Solid brass internals for heft & strength
- All Stainless Steel product piping for no corrosion w/ Carbonic Acids
- European style valve with FLOW CONTROL
- Counter to Faucet tip height: 12" (vertical)
- Tip of faucet to base center-line: 6" (horizontal)
- Base mounting shank diameter: 1-1/4" (counter-top hole)
- Base mounting shank length: 4-1/2" (figure 3-1/2" max counter thickness to allow for locking washers/nuts)
- 1/4" barb end connections
The old style Soda Draft Arms had the ability to mix soda water & syrups together. These don't. What do I do now? - Until the mfg of the classic style draft arms begins production again this is all that is available.
If you are a concession business or a 'brick & mortar' store that serves specialty sodas, you will need to PRE-MIX your concoctions. This is done using SODA TRANSFER TANKS (ball lock kegs). This is a whole new setup...give us a call or email us; we will walk you through it all and answer all of your questions.
This is special order equipment - made to order.
SHIPPING NOTE: Choose either "general" Priority Mail or UPS or FedEx.
This will NOT fit in any flat rate USPS box.
Box dimensions are 20x8x8.