Welcome, Sign In   |   First time visitor? Create a New Account
Your cart is empty

Freezer Conversion Thermostat - J.C. unit w/ Water Resistant Box

$54.85

  • Model:
    [Thermostat - K-CHI 8000]
  • Shipping Weight: 2.8lbs


FREEZER CONVERSION THERMOSTAT w/ JOHNSON CONTROL UNIT 

U.S. MADE JOHNSON CONTROLS THERMOSTAT UNIT IN THE SAME,
WATER-RESISTANT ENCLOSURE AS OUR ECONOMY THERMOSTAT.

Finally, a high quality & low cost unit is available!
Why pay $65+ for a Johnson Controls A19AAT thermostat?
This is the same A19AAT controller in a custom made water-resistent enclosure. The A19AAT is in an open metal box.

 

This thermostat, with a 5 foot extendable stainless steel sensor, is perfect for controling the temperature of your freezer conversion for beverage storage use, and many other applications, such as; direct control of heaters , fans , air conditioners, pet and reptile cages and more.
It can be set and used for both heating and cooling ranges.

SO SIMPLE AND EASY TO USE!
JUST PLUG INTO WALL SOCKET AND THEN PLUG YOUR APPLIANCE INTO THE BACK OF THE "PIGGYBACK" PLUG - THEN SET TEMPERATURE.

Excellent for use in:

  • Breweries & home brewing cold control
  • Wineries & home winemaking
  • Barns, greenhouses, garages, basements
  • Vacation homes, RV's
  • Computer rooms, construction sites, reptile/fish cages
  • 120Vac propane and electric heaters
  • and many more applications.

Not effected or damaged by electrical grid surges and lightning strikes, or power outages - like a digital thermostats are!

A graduated temperature control unit that can be used anywhere you have a 120volt outlet. Clear cover protects from weather and damage.

You will receive the thermostat pre-set for cooling.
Instructions to change to heat control (high side)

 
SPECIFICATIONS:

  • LOAD: 16 full load amps @ 120Vac
  • RANGE: +30^ F to +110^ F  (+ - 2^ accuracy)
  • DIFFERENTIAL: 2^
  • Nickel plated copper probe

This portable thermostat will handle almost any 120volt heater with no problem or an 8,000 btu air conditioner BUT CHECK YOUR APPLIANCES RATINGS FIRST.
 

Componants made in USA. Assembled and tested in USA.

 

 


Note: Brass probe is not rated to be immersed in fluid. You could take plastic or stainless tubing, solder or crimp the end and make a thermo-well if intended for fluid immersion.

INSTRUCTIONS:

  1. Unplug refrigerator or freezer from wall power outlet,
  2. Set refrigerator or freezer thermostat to maximum cold,
  3. Mount Conversion Thermostat in a postion where the temp probe will fit inside your cooling appliance and the power cord can reach to the wall power outlet,
  4. Plug cooling appliance power cord into Conv. Thermo power cord,
  5. Plug Conv. Thermo power cord into wall power outlet.


NOTICE: This item DOES NOT fit in a Priority Mail Small Flat Rate Box.
If using USPS, choose either Medium Flat Rate, General Priority or UPS.


NOTICE: DO NOT KINK THE REMOTE PROBE LINE. THIS WILL RENDER THE UNIT NON-OPERATIVE and is not covered by warranty.
Extended capillary tube probe thermostats are intended to have the probe set in place and left in place.
The capillary tube IS NOT designed for constant or frequent moving around.

Warranty Information



Add to Cart:

wabusiness template

Freezer Conversion Thermostat - J.C. unit w/ Water Resistant Box

Freezer Conversion Thermostat - J.C. unit w/ Water Resistant Box

Sorry we ran out!

Fill out this form and we will let you know when it comes back in stock