Procon Pump Series 1 (1300)

Product Features

• Series 1 pumps have the protection of an integral inlet 100 mesh wire screen strainer that is equipped with a removable cap to allow periodic cleaning. Strainer area is 3.25 sq. inches.
• Clamp-on & Bolt-on types available.
• FEATURES:
• Factory Description: PROCON's Series 1 pumps have the protection of an integral inlet strainer. The standard strainer is a 100 mesh wire screen. It traps particles that can cause serious damage to the pump. The strainer is equipped with a removable cap to allow periodic cleaning, every 4 months under normal conditions (more frequently with hard or turbid water). The clamp-on mounting style is shown in the photo; bolt-on mounting is also available.
• Note: There is an additional cost for pumps requiring Viton Seals and pumps marked with "K" (special clearances).
• Applications include:
• Carbonated water for soft drink dispensers, Espresso coffee machines, Beer cooling systems, cooling for TIG Welders, Reverse Osmosis systems, ultra-filtration systems, cooling circulation, constant temperature control, atomizing / misting systems, Automated pesticide misting systems, carwash machines, steam cleaning machines, cooling for X-Ray and medical lasers, water purification, boiler feeds, pressure booster pumps, and light hydraulic oils.
• IF YOU DO NOT SEE YOUR PROCON # ABOVE: Look below for a matching number. If present, select the corresponding catalog # item button shown below. If you do not see a matching number or if item number button is not shown, then: Select "Variable" item button and during checkout, in the "Special Instructions" textbox, enter the Procon number, Catalog number or the number shown on your pump.
• Denotes factory made special w/ 2 week turnaround.(Order series one pump, no choice marked. During checkout, in the "Special Instructions" box, enter catalog #)
• Capacity: 15 to 140 gph
• Nominal speed: 1,725 rpm
• Max. Discharge pressure: 250 psi

Specifications