NADS & TAPRITE Keg Tap Parts
and TAPRITE KEG TAP REPLACEMENT PARTS The most often replaced parts are the rubber seals at the "bottom" of the tap. Suitable for ball lock keg, homebrew, draft beer, and beverage dispensing repair.
keg taps & parts
N.A.D.S. Stainless Steel Keg Beverage Storage Draft Systems Keg Taps & Parts
Product Features
- N.A.D.S. & TAPRITE KEG TAP REPLACEMENT PARTS
- The most often replaced parts are the rubber seals at the "bottom" of the tap. There are two: The small one is #3, the large one is #6 Also of note: there are THREE Probe O-Rings(07S07106ih) on the interior shaft. To replace all of them order THREE, (not one, as shown in diagram as grouped #4)
- Enlarge the product picture for the reference number guide
Specifications
| REF # |
CATALOG # |
DESCRIPTION |
| 1 |
KegTapRprPrt - 12S07106ih |
Ball Retainer |
| 2 |
KegTapRprPrt - 12S07107ih |
Check Valve - Liquid out |
| 3 |
KegTapRprPrt - 07K09109ih |
Probe Washer, USA |
| 3 |
DISCONTINUED |
Probe Washer, EU |
| 4 |
KegTapRprPrt - 07S07106ih |
Probe O-Ring (1 O-ring)
3 needed/shaft - Order 3 |
| 6 |
KegTapRprPrt - 07K09108ih |
Bottom Seal Washer |
| 7 |
KegTapRprPrt - 07S07107ih |
Relief Valve/Ring - DISCONTINUED
STOCK ON HAND ONLY |
| 8 |
Click Here |
Beer Nut, Plated Brass |
| 9 |
Click Here |
Tailpieces |
| 11 |
KegTapRprPrt - 12S07112ih |
Check Valve - Gas In |
| 12 |
KegTapRprPrt - 12S07113ih |
Hinge Pin |
| 14 |
KegTapRprPrt - 12S07115 |
Yoke Assembly - Discontinued Stock on hand only |
| 15 |
KegTapRprPrt - 12S07159ih |
Handle - White |
| 15 |
KegTapRprPrt - 12S07172ih |
Handle - Red - DISCONTINUED
STOCK ON HAND ONLY |
| 15 |
KegTapRprPrt - 12S07119ih |
Handle - Blue |
