Growler Filler for Perlick 500-Series Faucets
GROWLER FILLER FOR PERLICK FAUCETS Designed to easily fill growlers or bottles right off the tap! Suitable for ball lock keg, homebrew, draft beer, and beverage dispensing repair.
faucets & repair parts
Perlick Draft Faucet Dispensing Hardware Beverage Service Faucets & Repair Parts
Product Features
- GROWLER FILLER FOR PERLICK FAUCETS Designed to easily fill growlers or bottles right off the tap! Two o-rings create a liquid tight seal within the faucet. Comes with one foot of beer line attached. Works ONLY with Perlick faucets. We recommend submerging the entire filler in a Star-San solution for at least a few minutes before using to sanitize it. Rinse after use for easy clean up. Foam can be greatly reduced if the filler and the growler are both at the same temperature as the beverage you are dispensing. Make sure you cap off the growler on foam for longer shelf life. This model fits the PERLICK STANDARD beer & wine faucets that have a diameter of 0.412" NOTE: The Growler filler DOES NOT fit the 545PC Perlick w/ Flow Control Valve or the old 425 w/ screw-in nozzle. The elongated nozzle's diameter is too small. CLICK HERE for standard U.S. faucets (NADS, etc)
