Home :: Specials & Limited Stock

Specials & Limited Stock

From time to time we get equipment that does not fit into other catagories OR limited quantity overstocks.
We get complete soda fountain install kits and then break down the different S/S parts and fittings, which are usable for many applications.

This section contains SPECIAL PRICING on these parts, fittings & overstocks.
SUPPLY IS LIMITED for each one of these items.

Click here for more Specials.

Displaying 1 to 46 (of 46 products)

Stainless Fitting -Used-1/4"- Y 1/4" J Fitting - Used Stainless Steel "J" fitting. 1/4" O.D. Used; pulled from scrapped soda systems. You will want to clean & sanitize. $1.49 Add:	Stainless Fitting -Used-1/4" - T 1/4" T Fitting - Used Thin-wall Stainless "T" connector. 1/4" od on all sides. Used. Pulled from scrapped out soda systems. Used for CO2 and liquid lines. $1.49 Add:	1/4" U-Bend w/Man - Used 1/4" U bend - Used Stainless Steel "U" fitting with manifold. 1/4" barbed ends. Used; pulled from scrapped soda systems. You will want to clean &... $1.49 Add:

1/4" 90^ SS Elbow - USED 1/4" Barbed 90^ Elbow - Used 1/4" Stainless 90^ Barbed Elbow fitting. USED. Cleaned. This fitting allows you to route hose around tight spaces to a 90^ angle. $0.99 Add:	Special - 1/4"mfl-3/16"Barb Ftg 1/4" Male Flare to 3/16" Barb Brass Barbed Fitting. 1/4" Male Flare thread to 3/16" Barb. USED fittings removed from air systems. Still very usable. Attach to regulator... $0.99 Add:	1/4" Hose Splicer - USED 1/4" Splicer - USED 1/4" Stainless Steel Hose Splicer. USED. Pulled from scrapped out soda systems. You will want to clean before use. $0.75 Add:

1/4"SvlNutSet90^ - Used 1/4" Swivel Nut Set w/ 90^ Barbed end 1/4" Swivel Nut Set 90^ Barbed end. USED. Pulled from scrapped out soda systems. You will want to clean & sanitize to your own standards. $1.49 Add:	Stainless Fitting-1/4x1/4Splicer 1/4" x 1/4" Straight Splicer 1/4" x 1/4" Stainless Steel straight splicer. New Old Stock. $0.99 Add:	Stainless Fitting-1/4x3/8Splicer 1/4" x 3/8" Straight Splicer 1/4" x 3/8" Stainless Steel straight splicer. New Old Stock. $0.99 Add:

Stainless Fitting -Used-1/4"-X 1/4" X Fitting - USED 1/4" Cross or "X" fitting. Thinwall Stainless Steel. Used; removed from Soda systems we have scrapped out. You will want to clean... $1.25 Add:	Stainless Fitting - 3/8" - T 3/8" T Fitting - New Old Stock Stainless "T" connector. 3/8" o.d. on all sides. New Old Stock from Pepsi soda systems. Used for CO2 and liquid lines. $1.25 Add:	3/8x3/8Splicer - USED 3/8" x 3/8" Straight Splicer - USED 3/8" x 3/8" Stainless Steel straight splicer. USED. Pulled from scrapped out soda system. $0.99 Add:

Special - 3 line Beer Manifold Beer MultiLine Manifold Stainless Steel Beer Line Manifold. Use to branch same product to several lines. 1/2" Barbed inlet. Beer nut threaded outlets. Four Available. ... $62.50 Add:	Shank Collar Beer Shank Collar Plastic Collar for beer shanks. Extra pieces from beer boxes we are rebuilding. NEW. If you have POS looking collars on your shanks, make them look... $1.50 Add:	BrewCity Shirt - Large Brew City STAFF Shirts - Large Brew City STAFF Shirts. Brew City was a Brew On Premise in San Francisco. When they closed in the late '90s we cleared them out. (there is a brew... $9.99 Add:

BrewCity Shirt - Medium Brew City STAFF Shirts - Medium Brew City STAFF Shirts. Brew City was a Brew On Premise in San Francisco. When they closed in the late '90s we cleared them out. (there is a brew... $9.99 Add:	CO2 Tank Wrench Co2 Tank Wrench CO2 Tank/regulator nut wrench. Used. The Beverage factory charges $4.50! $1.49 Add:	Drip Pan Grate - 1111 Drip Tray Grate - 20.5" Drip Tray Grate. Use to make a custom drip tray. Used. 20-1/2"l, 4-12"w, 3/4"h Stainless steel. This will NOT fit into a small flat... $10.00 Add:

Drip Pan Grate - 1112 Drip Tray Grate - 21.25" Drip Tray Grate. Use to make a custom drip tray. Used. 21-1/4"l, 6"w, 3/4"h Stainless steel. This will NOT fit into a small flat rate... $10.00 Add:	Hand Dryer Hand Dryers - NEW OLD STOCK Hand Dryers. Mfg. by Bradley. New old stock. Never used. In box w/ original spec sheets, etc. Industrial use/applications. Excelent for workplace,... $100.00 Add:	CO2 Refill - 16gram - BULK Keg Charger -CO2 Refill Cartridges 16gram 16 gram CO2 Refill Cartridges. Non-threaded end. Packed loose. Order as many as you need. As of 10-2009, 1,000 available. Will fit Keg Charger hand... $1.60 Add:

Keg Tap - Slider - Closeout Keg Tap - German "Slider" GERMAN "SLIDER" KEG TAP. Mfg. by Draught Tech. For Paulaner, Spaten, etc. kegs. European "A" system. Will Usually Fit:... $51.99 Add:	Special - Keg Tap-AmerSnke-TWIST KEG TAP - NADS American Sanke - Metal Twist Style A cancelled order is your gain! NADS all metal TWIST STYLE American Sanke Keg tap. $32.50 Add:	Old Wine Faucet & Shank Old Wine Faucet & Shank OLD Wine Faucet & Shank. This came out of my Elks Lodge a looong time ago; just found it again. It is old, gummy, yucki, but still works! 3"... $9.99 Add:

Premix Venture Refrigerated Beer Dispenser - Venture Refrigerated Drink & Beer dispenser by Cornelius. Originally made to vend premix soda, these units will dispense any product, including BEER. No... $249.00 Add:	Watts H2O Regulator-Used-14 Regulator - Water Pressure - used-14 This is used equipment. It has been removed from a working soda fountain system. There are scratches from normal use. You may need to disassemble... $4.99 Add:	Spcl - Flat Panel Shank Shank for Flat Panel or Draft Tower Shank for Flat Panels or Flat front Draft Towers. 3/16" barbed outlet; 90^ elbow 1" threaded shank length. $18.99 Add:

Used - Shank nut w/ 1/4" barb Shank Nut w/ 1/4" Barbed Tailpiece & washer USED: Beer Shank Nut with 1/4" barbed tailpiece and washer. You will need to clean with steel wool to make it pretty. $1.00 Add:	Used - Shank nut w/ 3/8" barb Shank Nut w/ 3/8" Barbed Tailpiece & washer USED: Beer Shank Nut with 3/8" barbed tailpiece and beer washer. You will need to clean with steel wool to make it pretty. $1.00 Add:	Used-ShankWingnut w/ 3/16" barb Shank Wing Nut w/ 3/16" Barbed Tailpiece USED: Beer Shank Wing Nut with 3/16" barbed tailpiece. You will need to clean with steel wool to make it pretty. $1.00 Add:

Shelf Clips Shelf Clips - Coolers Cooler Shelf Clips. These fit into the sidewall verticle rails to hold the shelves Aplicable to all coolers, such as, but not limited to: True,... $0.25 Add:	Hardware-SS-SwivelNutNut - 9/16 Swivel Nut - Nut only - 9/16" S/S Swivel Nut. Just the nut, no barb end. 9/16" I.D. $0.14 Add:	Swivel Nut Set - 1/2"x3/8" Swivel Nut set - 1/2" x 3/8" barb Stainless Steel Swivel Nut Set. 5/8" threaded to 3/8" barbed end. Can be used to connect any 3/8" hose to 5/8" MFL threaded parts... $2.75 Add:

Swivel Nut Set - 9/16"x3/8" Swivel Nut set - 9/16" x 3/8" barb Stainless Steel Swivel Nut Set. 9/16" threaded to 3/8" barbed end. Can be used to connect any 3/8" hose to 9/16" MFL threaded... $2.75 Add:	Special-3/8x3/8x1/4" Tfitting T Fitting - 3/8"x3/8"x1/4" "T-fitting: 3/8"x3/8" to 1/4". Used; pulled from soda system we scrapped out. You will need to clean & sanitize. Scratches in... $0.99 Add:	Stainless Fitting -Used-1/4" - T T Fittings - 1/4" - Used Thin-wall Stainless "T" connector. 1/4" od on all sides. Used for CO2 and liquid lines. Used. Pulled from scrapped out soda systems.... $0.99 Add:

SSFtngs - 9/16" - 3/8" T T-Fitting 9/16" main to 3/8" S/S "T" fitting. 9/16" barb split to 3/8" barb. $1.99 Add:	Spcl - WunderBar 14 button WunderBar 14 Button Beverage Gun WUNDERBAR 14-BUTTON BEVERAGE GUN This is a Pepsi New Old Stock, 14 Button Beverage Gun, in factory box. It comes with: Gun, Manifold Mounting... $300.00 Add:	Special - PrimReg #400 Chrome Primary Dual Gauge Regulator w/ Cage - #400 NEW Chrome body Primary Regulator with Gauge Cage. 0-2000 & 0-160 psi guages. 1/4" MFL output. Comes with tank washer. Pepsi overstock. Open... $37.49 Add:

CorneliusPrimary/Cage - #476 Cornelius Primary Regulator w/ Cage - #476 CORNELIUS PRIMARY C02 REGULATOR Pepsi overstock. Brand new in box. 0-160 & 0-1800 guages. Protective cage. Order CO2 washer separately. Item box... $34.99 Add:	Used Regulator #356 TRIPLE Gauge Regulator w/ CAGE - 356 TRIPLE Gauge Primary Regulator IN BLOCK. Mfg. by Watts/Fluid Air/ Two Primary and one Main pressure guages. 0-3,000 Main; 0-100 & 0-160 Secondary... $39.99 Add:	Special - ChrmScndryReg #475 Chrome Secondary CO2 Gauge - #475 CHROME PLATED SECONDARY CO2 REGULATOR Pepsi N.O.S. Single Guage Secondary Regulator. Two 1/4" mfl outlets w/ pressure relief valve. 0-100psi... $24.99 Add:

Regulator - Used - 07 Regulator - Secondary - 07 This is used equipment. It has been removed from a working soda fountain system. There are scratches from normal use. You may need to disassemble... $14.99 Add:	Regulator-Secondary-Used - 300 Regulator - Secondary - 300 Cornelius secondary regulator. 0-100psi gauge MFL inlet/outlet. Passthrough style This is used equipment. It has been removed from a working soda... $20.00 Add:	Regulator-Secondary-Used - 340 Regulator - Secondary - 340 TAPRITE SECONDARY CO2 REGULATORS. 0-100psi gauge. 3-way with MFL outputs. This is used equipment. It has been removed from a working soda fountain... $20.00 Add:

Regulator-Secondary-Used - 407 Regulator - TapRite Secondary - #407 TAPRITE SECONDARY CO2 REGULATORS. 0-100psi gauge. 3-way with MFL outputs. Plastic mounting base/wall mount bracket This is used equipment. It has... $20.00 Add: