Cart

DrafTec Acid Line Cleaner

  • Model:DrafTec-BLC-20A11102ih
  • Shipping Weight: 2.5lbs
  • Manufactured by: DrafTec

Price
$9.49

Add to Cart:
*Price Match Guarantee
 Report A Cheaper Price 

DrafTec Acid Line Cleaner.

  • For all hard water conditions
  • Resists corrosion in stainless steel tanks
  • Lowest foam formula
  • Leaves surfaces free of any build-up

No classified as Non-Hazardous so there is no hazardous material shipping charge!

RECOMMENDED USAGE:

For regularly maintained lines, use 2-3 ounces per gallon of water. For above average soiled lines, use 4-5 ounces per gallon. For really dirty lines, use 6-8 ounces per gallon of water.
The U.S. Brewer's Asc. draught beer quality manual recomends 3% solution (11oz. per gallon).

DRAFT LINE CLEANING PROCEEDURE:

For recirculation cleaning systems

  • Remove the beer faucets for hand cleaning of the parts & gaskets. Inspect gaskets for wear.
  • Push the beer with water out of the draft lines. Leave the lines packed with water. Fill the cleaning solution circulation unit or holding vessel with water.
  • In gallons, calculate the liquid volume the draft line system holds. This includes the liquid volume in the beer lines as well as the liquid volume in the cleaning solution holding vessel.
  • Measure out the proper amount of Draftec and add to water so that it immediately dilutes. NEVER mix by adding small amounts of water to the Draftec.
  • With all recirculating lines connected, pump at a rate not to exceed 2 gallons per minute.

For Static cleaning

  • Remove the beer by pushing with water.
  • Push the solution of Draftec through the lines, displacing the water.
  • Let sit in lines 15 to 20 minutes.
  • If possible, use line cleaning brush.
  • At end of cycle, push cleaning solution out of line with water. Continue flushing line.
  • Test with PH strip for ambient level.

Manufacturers

FOXX REGULATORS